Lifetime 538116 Instrucciones De Ensamblaje página 8

u SECTION 1 (CONTINUED) /
Tools and Hardware required /
8 mm & 10 mm
1.1
• Before assembling, note the differences between the two Table legs (BAS & BAT). when sitting on the bench, Table
leg (BAS) should be on your left.
• Before assembling, note the differences between the two Table legs (BAS & BAT). when sitting on the bench, Table
leg (BAS) should be on your left.
• Before assembling, note the differences between the two Table legs (BAS & BAT). when sitting on the bench, Table
leg (BAS) should be on your left.
2 1/2" (6,35 cm)
1.2
• slide the Cross Supports (BAU) over the Table legs as shown.
• slide the Cross Supports (BAU) over the Table legs as shown.
• slide the Cross Supports (BAU) over the Table legs as shown.
BAT
SECCIÓN 1 (SIGUE) /
HerramienTas y accesorios requeridos
BCE (x8)
2" (5,1 cm)
BAS
BAU
SECTION 1 (SUITE)
/ ouTils eT accessoires requis
2" (5,1 cm)
BAU
8
BAN (x8)
2 1/2" (6,35 cm)
BAT
BAS