Care & Maintenance - Blackstone 1814 El Manual Del Propietario

Ocultar thumbs Ver también para 1814:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Model 1814 | Owner's Manual |
Care & Maintenance
!
WA R N I N G
CARE & MAINTENANCE
When not in use, turn
unit controls and
gas source OFF.
Regularly clean your appliance between uses, especially after extended
periods of storage. In order to extend the life and condition of unit,
!
follow best practices detailed in this manual.
WA R N I N G
This appliance will be hot
Section 01
during and after use. Use
GENERAL CARE
insulated oven mitts or
gloves for protection from
hot surfaces or splatter from
VALVE CHECK
cooking liquids.
Ensure gas is off at the supply shut
!
off valve before checking appli-
C A U T I O N
ance valves. Knobs must be locked
NEVER handle hot parts
in OFF position.
with unprotected hands.
01. To check valves, push in knobs
and release. Knobs should
spring back.
02. If knobs do not spring back,
replace valve assembly before
using appliance.
03. Rotate knobs to LOW position
then turn back to OFF position.
Knobs should turn smoothly.
14
GENERAL CLEANING
Ensure that the appliance and its
components are sufficiently cool
before cleaning.
• Be sure to keep the ventilation
opening(s) of the cylinder enclo-
sure free and clear from debris.
• Baked-on grease deposits may
require the use of an abrasive
plastic cleaning pad. Use only
in direction of brushed finish to
avoid damage.
• DO NOT use abrasive pad on areas
with graphics.
• If a bristle brush is used to clean
any of the cooking surfaces,
ensure no loose bristles remain on
cooking surfaces prior to cooking.
BURNER MAINTENANCE
STORAGE
In most circumstances, burning
• In order to extend and maintain
residue off after cooking will keep
the life and condition of your
burner clean.
appliance, we strongly
recommend that the unit be
• Be sure that the flow of combus-
covered when left outside for any
tion and ventilation air is
length of time, especially during
not obstructed.
the winter months.
• Burner should be removed and
• When gas supply is connected
cleaned annually or whenever
to appliance, store appliance
heavy build-up or insects/insect
outdoors in a well-ventilated
nests are found in order to ensure
space and out of reach of children.
that there is no blockage in the
burner portholes or venturi tubes.
• Store appliance indoors ONLY if
gas supply is turned off, discon-
• Use pipe cleaner to clear obstruc-
nected, removed from appliance
tions. A wire brush may be used
and stored outdoors.
to remove corrosion from the
burner surfaces. (Please refer-
• When removing appliance from
ence the Cleaning the Burner
storage, clean burner assembly
Assembly section)
before starting appliance. (Please
reference the Cleaning the Burner
• When refitting burner, check that
Assembly section.)
the venturi tubes of the burner fit
over valve outlets.
AF TER EACH USE
PLASTIC PARTS: Wash with warm
soapy water and wipe dry.
PAINTED SURFACES: Wash
with mild detergent or nonabra-
sive cleaner and warm soapy
water. Wipe dry with soft nonabra-
sive cloth.
STAINLESS STEEL SURFACES:
To maintain appliance frame's high
quality appearance, wash with mild
detergent and warm soapy water.
Wipe dry with a soft cloth after
each use.
Care & Maintenance
| Owner's Manual | Model 1814
!
WA R N I N G
A clogged burner
tube can lead to a fire
beneath the appliance.
!
C A U T I O N
DO NOT use Citrisol, abra-
sive cleaners, de-greasers or
a concentrated cleaner on
plastic parts.
Damage to and
failure of parts may result.
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido