Troubleshooting
1
Water will not shut off when
turning the handle to the OFF
position
□
When you turn the handle to the full on position,
the water will turn on.
□
But when you turn the handle to the full off
position, the water does not turn off.
□
This indicates that the cartridge is damaged.
Turn off the water supply, remove the handle
and replace the cartridge (1).
1
2
The light on the sensor is
flashing continuously
□
If the handle is closed, turn the handle to the
on position and move your hand in the sensor
area. If the sensor ashes 10 times continuously
and slowly, then replace the 4 "AA" batteries.
14
Flash 10 times
continuously
and slowly
J
Replace the batteries
-