Operation; Care & Cleaning; Troubleshooting - Glacier bay FP4A4080SS Guía De Uso Y Cuidado

Operation

Removing the Quick Connecting Hose
CAUTION: Use caution when removing the quick
connecting hose connections in order to prevent cutting
your hands.
Push the quick connector (L) housing up.
Hold the clip and housing together and pull
down.
Care and Cleaning
This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following:
Clean periodically with a soft cloth.
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.

Troubleshooting

Problem
There are leaks underneath the
handle.
The aerator leaks or has an
inconsistent water flow pattern.
There are leaks from the hose
underneath the deck.
The hose does not retract.
L
Possible Cause
The retainer nut has come loose
and the O-ring on the cartridge
is dirty or damaged.
The aerator is dirty or mis-fitted.
The hose and spray head
connection may be loose.
The weight is not installed in the
appropriate position.
9
Tighten the retainer nut.
Clear or replace the O-ring.
Remove the aerator and check for
debris in the aerator screens.
Confirm that the rubber washer is
properly installed.
Tighten the connection between the
spray head and hose.
Reinstall or readjust the weight.
Please contact 1-855-434-5224 for further assistance.
Solution
HOMEDEPOT.com