Location Requirements - Haier HWF05XCR Guía De Uso Y Cuidado

ENGLISH

LOCATION REQUIREMENTS

IMPORTANT:
O
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models:
HWF05XCR
NOTE: o
D not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough window opening for the air conditioner. (See Fig.2)
• The air conditioner must not be installed in a through-the-wall sleeve
or in a wall. It can only be installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes,
trees, etc. Air must be able to pass freely through the cabinet
louvers. (See Fig.1)
WINDOW INSTALLATION
Window opening measurements: (See Fig. 2)
A. Width Min/Max
B. Height Min
PAGE 6
s b r e e v all governing codes and ordinances. Check the location where the air
Fig. 1
CABINET LOUVERS
HWF05XCR
21 7/8"-36"
13-3/8"
INSTALLATION REQUIREMENTS
Fig. 2
B-HEIGHT
A-WIDTH
AIR DISCHARGE