H Ardware C Onnections - Bose ControlSpace EP22-D Guia De Instalacion

EP22-D Installation Guide
pro.Bose.com
Network LED Indicators
Both Dante ethernet interface port LEDs will remain off if there is no
Dante network connection. If an active connection is made, both LEDs
will light up. If there is network activity, the yellow LED will flash.
H C
ardware OnneCtiOns
The EP22-D accepts and drives either unbalanced or balanced
audio devices. Refer to the following diagrams and instructions for
connecting different types of audio devices. Professional grade audio
cabling is recommended to achieve the best audio performance
throughout the system.
Input from a Balanced Source
To connect balanced sources to the EP22-D, connect positive output
to positive input, negative output to negative input, and connect the
grounds together through the cable shield.
Figure 2.
WP22B-D
Input
Source
Balanced source
connection
Shield
15