• Protects delicate items.
• Enables laundry items to cool off faster by
the throughput of air, thereby preserving the
fabric quality.
For dry ironing without steam, the blower
functions can remain switched off.
STORAGE
When you have finished, proceed
as follows (E):
Before removing the steam station/iron, ensure
that you have read the instructions for use
which came with your steam station and iron.
- Switch
off
the
Active
(0 setting).
- Disconnect the cord for the Active Ironing
Board from the mains. Take the steam
station / iron plug out of the socket.
- Remove the steam station / iron from the
rest.
To store the Active Ironing Board
away (F):
- Take hold of the Active Ironing Board with
both hands, lift it up slightly and fold together
using the lever.
- Wind the cord up loosely in loops, making
sure that it is not squashed or kinked.
The Active Ironing Board can be stored away
folded up (with the universal iron rest at the top).
Place the Active Ironing Board in a safe position
so that it will not fall over.
The transport lock should be engaged to secure
the frame whilst the board is folded up.
CLEANING
The Active Ironing Board can only be cleaned
when the plug is disconnected from the mains
and when the steam station/iron has cooled
down. Clean using a soft, damp cloth to wipe
down the appliance. Do not use detergents of
any kind.
A replacement for the ironing board cover can
be purchased from After-sales or specialist
outlets.
ACCESORIES
A replacement for the active ironing board can
be purchased from After-sales.
Ironing board cover
TN10100
TN10200
DISPOSAL
Ironing
Board
electronic equipment – WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.
You can download this manual from the
local homepages of Siemens.
Accessory code
572128
573850
This appliance is labelled in
accordance
with
Directive 2002/96/EG –concerning
used electrical and electronic
appliances (waste electrical and
en
European
9