Publicidad
Mix ’N Move
Toys
To Install Toys
Step 1.
To use one of the toy mounts for the first time, you will need
to remove the small plug which covers the toy mount.
Remove child from product before removing plugs.
With the aid of a screwdriver, carefully pry up one edge of the
plug until it comes off.
Throw the plug away immediately; it is not reusable.
Step 2.
Insert the two prongs on the toy base into a toy mount
at the notches.
Step 3.
Turn toy base
/
turn until you feel the toy snap into place.
1
4
Check that toy is firmly inserted by pulling on the toy.
Toy is removable (turn it the other way with a little pressure)
so that you can replace it with other toys when desired.
© 1998 Graco 455-10-98
™
IS1700
Congratulations
on your purchase
of a Graco
product
®
with Mix ’N Move
Now your baby can enjoy an ever-changing
array of amusements and take favorites
along—on a swing, a highchair, or a stroller!
Our goal is to make every product the best it can be!
We are also committed to supporting our products after
purchase. If you need replacement parts or would like
to speak to Graco about your product, please contact
our
Customer Service Department at 1-800-345-4109.
Toys!
™
Publicidad
