Installation - Glacier bay FS1A0046BNV Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean off the mounting surface.
□
Remove the lock nut (G), metal washer (F),
rubber washer (E) and rubber washer (D) from
the faucet.
□
Insert the faucet (A) through the mounting hole
in the sink until faucet (A) sets on top of the
sink.
2
□
A
4
Securing the faucet
Slide the rubber washer (D), rubber washer (E),
metal washer (F) and lock nut (G) over threaded
rod (C). Use the lock nut (G) to secure the rubber
washer (D), rubber washer (E) and metal washer
(F).
2
A
D
E
F
G