Installing The Stand; Disconnecting The Stand - Samsung 8 Serie Manual De Usuario

❑
Input cables (Sold seperately)
HDMI
¦

Installing the Stand

N
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using
the screws.
1. Attach your LED TV to the stand.
N
Two or more people should carry the TV.
N
Make sure to distinguish between the front and back of the stand when
attaching it.
N
To make sure the TV is installed on the stand at a proper level, do not apply
excess downward pressure to the upper left or right sides of the TV.
2. Fasten screws at position 1 and then fasten screws at position 2.
N
Stand the product up and fasten the screws. If you fasten the screws with the
LED TV placed down, it may lean to one side.
¦

Disconnecting the Stand

1. Remove screws from the back of the TV.
2. Separate the stand from the TV.
N
Two or more people should carry the TV.
. Cover the bottom hole with the cover.
[8500-NA]BN68-02322C-Eng.indb 85
HDMI-DVI Component
English - 8
Composite(AV) Coaxial (RF)
Front
1
VGA
Back
2
2009-07-28 11:23:57