Install The Stand (Un19C4000, Un22C4000); Install The Stand (Un26C4000) - Samsung 4000 Serie Manual De Usuario

See separate guide for installing the stand.
Stand Base
Follow the steps below to connect the TV to the stand.
1. Insert the stand body into the
stand base.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Lay the product down, with the screen facing up and fasten the screws.
See separate guide for installing the stand.
Stand (1EA)
Follow the steps below to connect the TV to the stand.
Screws (M4 X L12)
Guide Stand
Stand
Rear
1. Connect the Guide Stand to the Stand
using five screws (M4 X L12) as shown.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.

Install the Stand (UN19C4000, UN22C4000)

2. Screw the stand base to the stand
body.

Install the Stand (UN26C4000)

Guide Stand (1EA)
Top view
2. With your TV upright,
connect the TV to the Stand
as shown.
Stand Body
3. Slide the TV onto the stand body.
(A) 5EA (M4 X L12)
(B) 5EA (M4 X L8)
Screws (10EA)
2
1
3. Fasten two screws (M4 X
L8) at position 1, and then
fasten three screws (M4 X
L8) at position 2.
English
5