Transmitter
Transmitter
Your Transmitter is an advanced controller designed for the beginner to be easy to use and tune. You will need to
Preparing the transmitter
follow the steps below to ensure you prepare the controller correctly for use and understand the adjustment
possibilities available.
Preparing the transmitter
The function switches on the transmitter
6
The function switches on the transmitter
1
9
8
7
5
6
Throttle Trigger
Throttle Trigger
1.
Push the trigger forward to
1
brake
2.
Pull the trigger backwards to
Neutral
2
go forwards and speed up
Neutral
2
Steering Wheel
R
L
Insert the aerial into
the hole and turn
clockwise until it is
tightly secured.
Open the battery holding
tray to expose the empty
battery slots.
Insert 8 AA batteries into
the marked spaces.
Please note the correct
direction of the batteries
Incorrect battery insertion
could lead to damage
1.
Aerial
3
2.
Throttle Trim
3.
Steering Trim
1.
1
4
10
4.
Frequency Crystal
2.
2
5.
Throttle Trigger
3.
6.
Steering Control
4.
2
3
(wheel)
5.
4
5
Steering Wheel
1.
Push the trigger
forward to brake
2.
Pull the trigger
backwards to go
forwards and
speed up
1
Turn the steering wheel to the left
or right to make the go vehicle left
or right
Turn the steering wheel
to the left or right to
make the go vehicle
left or right
7.
Power Switch
8.
Battery level
indicator
9.
Steering reverse
switch
10.
Throttle reverse
Aerial
switch
Throttle Trim
11.
Steering Throw
Steering Trim
dial
Frequency Crystal
12.
Steering End
Throttle Trigger
Point dials (left/
right lock)
13.
Throttle End Point
dials (low/high
points)
Throttle/Steering Trim
R
L
End Point Adjustment Dials
Both steering and throttle have high point adjustments which
allows you to adjust left and right steering lock & high and low
throttle points. You can also adjust the overall lock your
vehicle has after adjusting your individual side locks.
All of these adjustment dials require an anti clockwise
movement for more and clockwise movement for less.
5
Open the battery holding
tray to expose the empty
battery slots.
Insert 8 AA batteries into
Insert the aerial into the
the marked spaces.
hole and turn clockwise
Please note the correct
until it is tightly secured.
direction of the batteries
Make sure you never over
Incorrect battery insertion
extend the aerial as this
could lead to damage
will cause it to break.
Close the battery holding
tray to safely conceal and
secure the batteries.
12
6.
Power Switch
7
7.
Battery level indicator
8.
Steering reverse switch
8
9.
Throttle reverse switch
10.
Steering Control (wheel)
Throttle/Steering Trim
Throttle Trim
1.
Turn anti clockwise for
more brake
Throttle Trim
1
2
2.
Turn clockwise for more
1.
Turn anti clockwise for more
throttle
brake
2.
Turn clockwise for more
Steering Trim
throttle
1.
Turn anti clockwise to trim
1
2
Steering Trim
to the left
1.
Turn anti clockwise to trim to
2.
Turn clockwise to trim to
the left
the right
2.
Turn clockwise to trim to the
right
9
11
13
10
1
2
1
2