Papago GoSafe S37 Manual Usuario página 10

4. Settings
Press the
● Record Mode
a. Automatic Recording
b. Monitor Mode: When this mode is selected, your device will take
one snapshot per second.
c. Motion Detection: When this mode is selected, recording starts when
dash cam detects movement. If there is no movement for more than 60
seconds, recording will stop and be switched to detection mode.
This function only works when the device has a continual power
source after the vehicle´s engine is turned off.
●Driving Safety
a. Calibrate:This helps the device use all features optimally.Caution:Do
not calibrate device while driving.
b. FCWS:The device activates this feature with speeds over 60 km/h.
It detects the distance of the car in front of you and will give a warning
when you are driving too close.
c. Stop Sign Recognition:The device will recognize any Stop Sign and
warn you with a beep.
d. Stop & Go: After you stop for at least 10 seconds (as for red lights), the
device will detect when the car in front has proceeded and it will give an
audio alert to remind you to proceed driving as well.
e. Driver Fatigue Alarm: When activated, the user can setup an alarm
clock, periodically reminding you to rest. Options available are : 30
minutes/1 hour/2 hours/4 hours/off.
f. Light Reminder : When activated, if driving in a dark environment (such
as tunnel or parking structure), it will have an audio alert and display the
light alert icon on the screen. The alert can be turned on/off.
g. TPMS :GoSafe S37 supports the TireSafe D10E (sold separately). The
TireSafe D10E is a Tire Pressure Monitoring System that allows you to
view each of your tire's pressure and temperature on your device's
display.
Note: This device does not support both the GPS antenna
and TPMS simultaneously. Please use only one of the
optional accessories at a time.
button to enter "Settings".
English 9