Power Off - Papago GoSafe S37 Manual Usuario

3. Start and Go
3.1 Power On
Insert the car charger cable into the car's cigarette lighter and the other
end into the mini USB port on the device. Make sure to install the Micro
SD Card into the Micro SD Card slot on device. After turning on, the
system will start recording automatically. The LED light will turn green
when recording mode has started.
*Reminder: Please format Micro SD card before you start recording.
Please refer to page 2 for instructions.

3.2 Power Off

To turn off device, hold the power button for at least 5 seconds. To avoid
corrupting the last file recorded, do not eject SD Card immediately after
powering off.
3.3 LED
LED Color
Green ON
Green Off
English 6
Behavior
Power ON, Recording
Power Off, Not Recording