Honeywell RTHL2310 Serie Guía De Instalación Rápida página 23

Troubleshooting
If you have difficulty with your thermostat, please try
the following suggestions. Most problems can be cor-
rected quickly and easily.
Display is
blank
Heating or
cooling system
does not
respond
• Make sure furnace door is closed
securely.
• Make sure fresh AAA alkaline
batteries are correctly installed
(see page 7).
• Set System switch to Heat. Make
sure the temperature is set higher
than the Inside temperature.
• Set System switch to Cool. Make
sure the temperature is set lower
than the Inside temperature.
• Check circuit breaker and reset if
necessary.
• Make sure heating & cooling power
switches are on.
• Make sure furnace door is securely
closed.
• Wait 5 minutes for the system to
respond.
21
RTHL2310/RTHL221
69-2578ES—01