Indel B TB Steel Double Door Serie Instrucciones De Uso página 26

ENGLISH
DUALZONE
Temperature may be set independently for each Zone.
Please note: The Right Zone must always be set to an equal or cooler temperature than the Left
Zone. If the Right Zone is set to a temperature warmer than the setting for the Left Zone, the set
temperature for the Left Zone will automatically be adjusted to be equal to the Right Zone.
Tips:
1. In general, think of the Right Zone as the colder zone.
2. Set the temperature for the Right Zone first. The control panel will allow the Left Zone to be set to any
temperature equal or warmer than the Right Zone, but will not allow a setting cooler than the Right Zone.
RUN
LEFT BIN
HIGH
MID
LOW
BATTERY PROTECTION
Left Zone may be set to
the same temperature
as the Right Zone
SINGLE ZONE MODE
This unit is equipped with the feature that allows the Left Zone to be turned off when not required allowing
the Right Zone to be utilised alone.
To turn the Left Zone off, press the Left Zone
The LED display will turn off.
To activate the Left Zone again, press the
The LED display will turn on.
24
ZONE
Must be cooler than left zone
RUN
RIGHT BIN
MAX
ON
SET SET
OFF
MIN
COMPRESSOR SPEED
BATTERY PROTECTION
PRESS SIMULTANEOUSLY
RIGHT
LEFT
ZONE
RUN RUN
LEFT BIN RIGHT BIN
HIGH
MAX
MID ON
SET SET
OFF
MIN
LOW
BATTERY PROTECTION COMPRESSOR SPEED
Left Zone may be set to
a warmer temperature
than the Right Zone
+ buttons simultaneously.
+ buttons simultaneously.
LEFT
RIGHT
ZONE
ZONE
COOLING COOLING
LEFT BIN RIGHT BIN
HIGH
MAX
MID ON
SET SET
OFF
MIN
LOW
COMPRESSOR SPEED
TB STEEL DOUBLE DOOR
RUN RUN
LEFT BIN RIGHT BIN
HIGH
MAX
MID
ON
SET SET
OFF
MIN
LOW
BATTERY PROTECTION COMPRESSOR SPEED
Left Zone cannot be set
to a cooler temperature
than the Right Zone
TB STEEL DOUBLE DOOR_27-04-2018