Unpacking The Instrument - Rohde & Schwarz RTH Manual De Instrucciones

®
R&S Scope Rider RTH
2.1

Unpacking the Instrument

When you receive your shipping package, unpack and inspect the package and
its contents for damage.
1. Inspect the package for damage.
If the packaging material shows any signs of stress, notify the carrier as well
as your Rohde & Schwarz service center. Keep the package and cushioning
material for inspection. Keep a damaged package and the cushioning material
until the contents have been checked for completeness and the instrument
has been tested.
2. Unpack the handheld scope and the accessories and check the contents for
completeness, see
If anything is missing, contact your Rohde & Schwarz service center.
3. Inspect the handheld scope and the accessories.
If there is any damage or defect, or if the R&S RTH does not operate properly,
notify your Rohde & Schwarz service center.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped at a later date, you can use the material to protect the control
elements and connectors.
Package contents
The delivery package contains the following items:
● R&S RTH handheld scope
● 4 Gbyte microSD card, installed in the battery compartment
● Power adapter with cable and adapter set for various socket types
● Battery pack
● R&S RT-ZI10 probes (2x for R&S RTH1002; 4x for R&S RTH1004)
● DMM test leads (only for R&S RTH1002)
● Hand strap, attached on the handheld scope
● Printed "Getting Started" manual and "Basic Safety Instructions" brochure
Optional accessories and their order numbers are listed in the data sheet.
Getting Started 1326.1561.02 ─ 05
"Package contents"
Unpacking the Instrument
on page 16.
Preparing for Use
16