Tabla de contenido
Publicidad
®
R&S
Scope Rider RTH
For a description of the keys, see
on page 36.
3.2
Top View
The R&S RTH1002 has two BNC input connectors CH1 and CH2, and two 4 mm
banana plug inputs for multimeter measurements. The channel inputs have dou-
ble channel-to-channel isolation that allows for independent floating measure-
ments at each input. The DMM input is fully isolated from scope inputs, interfa-
ces, and ground.
Figure 3-3: Top view of R&S RTH1002
The R&S RTH1004 has four BNC input connectors CH1, CH2, CH3, CH4. The
channel inputs have double channel-to-channel isolation that allows for independ-
ent floating measurements at each input.
Figure 3-4: Top view of R&S RTH1004
Getting Started 1326.1561.02 ─ 05
Chapter 4.3.3, "Using Front Panel
Instrument Tour
Top View
Keys",
23
Publicidad
Tabla de contenido
