Connection - JVC KW-R925BTS Manual De Instrucciones

Wiring connection
Output terminals ( 32)
Vehicle
dashboard
Factory wiring
harness (vehicle)
Custom wiring harness
(separately purchased)
Blue: To power antenna
Blue/white: To amplifier
Brown
* 1
Firmly connect the
ground wire of the
amplifier to the
car's chassis to avoid
damaging the unit.
* 2
You can also connect
a subwoofer speaker
directly using this lead
without an external
subwoofer amplifier.
For setting, 22.
Recommended connection
To the steering
Light blue/yellow
wheel remote
STEERING
control adapter
WHEEL
REMOTE
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
(Not used)
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Green: Rear speaker *
2
Green/black *
Signal cord (not supplied)
Antenna terminal Fuse (10 A)
2
/For 3-way crossover: Tweeter (left)
JVC Amplifier *
(For KW-R925BTS)
USB cable (DC 5 V 1.5 A)
(approx. 1.2 m/4 feet)
MIC (Microphone input
terminal) ( 14)
Expansion port (12 V 500 mA)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Remote wire
(not supplied)
Ignition switch
Car fuse block
Separate red wire
Make this connection if your vehicle factory wiring
harness does not have "12 V ignition switch" wire.
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to
professionals for your safety. Consult your car
audio dealer.
ENGLISH
1
33