Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
In-Car
In-Car
Connections
Connections
USB connection
Connect your smartphone (iPhone or Android device)
for using Apps on the screen of this unit.
• You can also connect a USB mass storage class
device such as a USB memory, digital audio player,
etc. to the unit. But you cannot connect a PC,
portable HDD and USB hub.
iPhone/Android device
A
B
USB device
(USB1)5V
1.5A
USB terminal from the rear panel
A For connecting your Android device, use the USB
cable (commercially available)
B For connecting your iPhone, use the USB cable for
iPhone KS-U62 (optional accessory)
Bluetooth® connection
Information for using Bluetooth devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such as
mobile phones (smartphones), portable PCs, and other
devices. Bluetooth devices can be connected without
cables and communicate with each other.
• Some Bluetooth devices may not be used with this
unit depending on the Bluetooth version of the
device.
Pairing a Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, register the device to this unit (pairing).
Pairing allows Bluetooth devices to communicate with
each other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires
confirmation.
– For devices with Bluetooth 2.0:
You need to enter a PIN code both on the device
and the unit for pairing.
• Once the connection is established, it is registered
in the unit until you initialize the Bluetooth settings
or the unit itself. Up to five devices can be registered
in total.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
Auto pairing
When <Auto Pairing> is set to [ON], Android devices
with Android Auto are automatically paired when
connected via USB. (Not available depending on
Android OS versions.)
Pairing a Bluetooth device using SSP
(for Bluetooth 2.1)
1
Display the Home screen.
2
Display the <Device List> screen.
From the Home screen (page 4), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
• You can also use the pop-up function menu to
display the <Device List> screen (page 11).
ENGLISH
7
Publicidad
Tabla de contenido
