Avanti BD7000 Manual De Instrucciones página 11

Beer Keg Installation Sketch
Installation of CO Regulator
2

Attach the CO regulator to the cylinder by turning the regulator nut
2
onto cylinder valve, making sure washer is securely inserted into
connecting nut. Tighten snug using an adjustable wrench (not
supplied) and assure there are no leaks. (See Figure 1)

Installation Of CO2 Air Line Hose To Regulator

Attach the open end of the red hose to the hose barb connection on
the regulator. (See Figure 2)

Secure hose by using one clamp provided.

Use pliers/screwdriver to tighten clamp and assure no leaks.

11
Figure 1
Figure 2