Danby DAC080B5WDB Manual Del Propietário página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
SHORTCUT FUNCTION
The shortcut function is only available on the remote
control. It can be used to set a favourite setting.
1. Set the appliance to the temperature and fan
speed that you would like to set as a favourite.
2. Press and hold the shortcut button for 2 seconds.
3. Press the shortcut button at any point in future to
return to the favourite setting.
If no favourite is set, pressing the shortcut button will
cause the appliance to run in auto mode at 29°C
(79°F), with fan speed set to auto.
TIMER FUNCTION
The timer function is only available on the remote
control. It can be used to turn the appliance on or
off after a set period of time.
To set the automatic timer:
1. Press the timer on or timer off button depending
on whether the appliance should turn on or off
after the set period of time.
2. Use the timer buttons to select the desired
amount of time before the appliance should turn
on. The timer buttons will add or subtract time in
30 minute increments up to 10 hours and then in
1 hour increments up to 24 hours.
3. Turning the appliance on or off at any time will
cancel the timer settings.
ENERGY SAVER FUNCTION
The energy saver function is only available on the
remove control in cool mode. It will automatically
cycle the fan on and off when the compressor is not
in use to minimize how often the compressor needs
to turn on.
The fan will continue to run for 3 minutes after the
compressor turns off. The fan will then cycle on for
2 minutes in 10 minute intervals until the ambient
temperature is above the set temperature, at which
point the compressor will turn on and cooling will
resume.
SLEEP FUNCTION
The sleep function can be used to conserve energy
during sleeping hours.
When selected, the set temperature will increase
by 1°C/2°F every half hour for one full hour. The
appliance will hold the new set temperature for
6 hours before automatically returning to normal
operation.
The sleep function can be canceled at any time by
pressing the sleep button.
WIRELESS CONNECTION
This appliance can be controlled with a wireless
application on your wireless device.
Visit https://www.danby.com/support/#apps
to download the application and learn about its
operation.
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido