● Take hold of the appliance door by the
recessed grip and open�
● Remove the water tank, rinse it and fill it
with fresh water up to the "max." mark.
● Replace the water tank and click into
place�
● Remove the bean container, fill with
coffee beans and replace.
● Set the power switch to I and
close the appliance door�
The appliance heats up and is rinsed�
The display is activated�
"Set the language you require" appears�
● Press the M arrow button. The field
"English" has a light background. The
language can be changed.
● With the L arrow button select the
desired language�
● Press the N arrow button. The field
"Language" has a light background.
● Select the "Water hardness" with the L
arrow button.
Note:
It is important to set the water hardness
correctly to enable the appliance to accu-
rately indicate when the descaling program
should be run. The preset water hardness
is level 4� If a water softener is installed in
the house, please set the water hardness to
level 3� You can also check the water hard-
ness by asking your local water supplier.
● Use the enclosed test strip to determine
the water hardness. Briefly dip the test
strip in water and check the result after
one minute�
Level
Water hardness
g/gal (US)
1
1�0426 - 7�2985
2
8�3412 - 14�597
3
15�64 - 21�896
4
22�938 - 31�279
● Press touch button L. The field "Water
hardness" has a light background.
● Press the M arrow button. The field
"4 (very hard)" has a light background.
The water hardness can be changed.
● Select "Home Connect" with the touch
button L�
● To now connect the appliance to the Wi-Fi
network (home network), press the touch
button M�
● To connect the appliance to a Wi-Fi
network later on, press the symbol L�
"Complete set-up" appears�
● Press touch button M� The settings
for Language and Water hardness are
saved�
Note:
When selecting [ Home Connect ] please
read the detailed description in the section
"Home Connect".
The appliance is ready to use when the
drink symbols are shown on the display.
The integrated fan switches on each time
a drink is dispensed and switches off again
after a few minutes�
Note:
When the appliance is used for the first
time after running a service program, or if
it has not been operated for a long period,
the first beverage will not have the full
aroma�
When the fully automatic coffee machine
is first used, a suitable thick and stable
"crema" is only achieved after the first few
cups have been dispensed.
Switch off appliance
● Press the I button.
The appliance rinses and switches to
energy saving mode�
Exception: If only hot water is dispensed,
the appliance switches off without rinsing.
● To switch the appliance off completely,
open the appliance door and set the
power switch to h�
NOTICE:
Do not press the power switch while the
appliance is in use�
Initial use
en
9