Thermador TCM24TS Guía De Uso Y Cuidado página 22

en Menu
● Press the water filter firmly into the
opening of the water tank�
● Fill the water tank with cool water up to
the "max" mark.
● Remove the milk tube from the milk
container and close the door�
NOTICE:
Do not jam the tube when closing the door.
● Place a container with a capacity of 17 oz
(0�5 l) under the outlet�
● Press C�
Water will now flow through the filter to
rinse it�
The appliance is ready for use again�
Note:
Rinsing the filter simultaneously activates
the setting for the change filter display�
The filter is no longer effective when the
"Replace water filter" display appears, or at
the latest after two months. It needs to be
replaced for reasons of sanitation and to
prevent a build-up of limescale (which could
damage the appliance)�
● If a new filter is not inserted, select
the setting "Remove" and press button
C�
The message "Remove filter, reinsert
water tank, close door" appears�
Note:
If the appliance has not been used for a
prolonged period (for example, while you
are on vacation), the existing filter should
be rinsed before the first time the appliance
is used again� To do this, simply dispense a
cup of hot water�
Detailed information about the water filter
can be found in the manual supplied with
the filter.
18
Temperature format
Setting option in "°F" or "°C"�
Volume units
Setting option in "oz" or "ml"�
Switch off after
To set how long the appliance should wait
after the last drink was prepared before it
automatically rinses and switches itself off.
You can specify values from 15 minutes to
12 hours� The factory setting is 30 minutes�
Home Connect
Settings for connection to Wi-Fi network
(home network) and mobile devices (see
section "Home Connect").
Illumination
Setting the illumination of the beverage
outlet� "On", "When in use" or "Off" can be
selected�
Brightness illumination
Setting the illumination lightness of the
beverage outlet. "Level 1" to "Level 10" can
be selected.
Brightness display
Setting the illumination lightness of display�
Key press sound
Switch the signal tones on or off.
Clock display
Display option for time and date "Off" or
"Digital" (on). The settings for this can be
changed in the next menu options�
Note:
If the appliance is switched off at the
power switch or there is a power failure,
the settings for the time will be lost.
Time of day
Setting for the current time�
Clock format
Setting option in "12hr" (American mode) or
"24hr" (European mode)
Note:
No difference between am and pm.
Frost protection
Service program to prevent frost damage
during transportation and storage�