Operation
1) Turn shower handle counterclock-
wise approximately 1/4 turn to put
valve in cold position.
Operation (Diverter Control S-9600TS-PLR and S-9602-PLR Only)
1) Turn diverter handle left for tub spout operation.
Operation (Volume Control S-9600-PLR and S-9601-PLR Only)
1) Turn volume control handle left for high flow.
Troubleshooting Chart
Problem
Finish is spotting.
Symmons Industries, Inc.
Copyright © 2015 Symmons Industries, Inc.
2) Turn shower handle counterclock-
wise approximately 1/2 turn to put
valve in warm position.
Cause
Elements in water supply may cause
water staining on finish.
■
■
31 Brooks Drive
Braintree, MA 02184
■
www.symmons.com
3) Turn shower handle counterclock-
wise approximately 3/4 turn to put
valve in hot position.
2) Turn diverter handle right for showerhead operation.
2) Turn volume control handle right for low flow.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
■
Phone: (800) 796-6667
■
■
gethelp@symmons.com
Solution
rinse with water.
■
Fax: (800) 961-9621
■
ZV-3129 REV A
110515