Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1) Measure and mark centerlines for
mounting bracket installation using
dimensions on page 2.
Notes: 663TB-18 and 663TB-24 only.
Make sure both centerline marks are
level.
2a) Dry Wall Option: Place
mounting brackets into desired
position. Using brackets as a
guide, carefully drill 5/16" holes
into wall.
1
Note: For plaster walls 1/2" thick or
less, insert toggle tool into toggle to
secure behind wall prior to installing
accessory trim.
Finish is spotting.
Symmons Industries, Inc.
Copyright © 2015 Symmons Industries, Inc.
2b) Stud Option: Place mounting
brackets into desired position.
3) With mounting brackets in
position, secure to wall using
screws.
Troubleshooting Chart
Elements in water supply may cause
water staining on finish.
■
■
31 Brooks Drive
Braintree, MA 02184
■
www.symmons.com
4) Hang top of accessory on
mounting bracket. Lower into
position.
1
5) Secure with set screw.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
■
Phone: (800) 796-6667
■
gethelp@symmons.com
1
1
2
rinse with water.
■
Fax: (800) 961-9621
■
■
ZV-3178 REV A
112515
Publicidad
Tabla de contenido
