Surface Units (Cont.)
Throughout this manual, features and appearance may vary from your model.
Using the Bridge Zone (on some models)
To use the bridge zone, adjust the settings for the left
rear and left front burners to create one large area for
even cooking. Turning both burners to the same setting
will maintain an even power across the bridge zone.
Using the Warming Zone
WARNING
FOOD POISON HAZARD:
temperatures below 140°F.
heat cold food.
The Warming Zone is located in the back center of the
glass surface.
To use the Warming Zone:
1. Touch the Warming Zone On/Off pad.
2. To select the desired control setting, touch the
Select pad once for Low, twice for Medium or three
times for High.
To turn off the Warming Zone:
Touch the Warming Zone On/Off pad.
For best results, all foods on the Warming Zone should
be covered with a lid or aluminum foil.
Always use pot holders or oven mitts when removing
food from the Warming Zone, as cookware will be hot.
melt onto the surface and be very difficult to clean.
cooking.
10
Models with a bridge zone only.
49-80694-1