Manuales relacionados para SANUS VuePoint F55b
Resumen de contenidos para SANUS VuePoint F55b
- Página 1 F55b INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/253...
- Página 2 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! Does your TV weigh more than 130 lb (59 kg) including accessories? 130 lb No —...
- Página 3 Dimensions 25.4 [cm] [64.5] UP TO 26.6 [67.5] [9.9] [16.6] 15.9 [2.5] [40.5] 17.2 [43.7] [8.5] OFFSET 28.1 [71.4]...
- Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 5 Parts and Hardware for STEP 2 Lag Bolts Wall Plate Wall Plate Template 5/16 x 2¾ in. 5/16 x 2¾ in. Washers .695 x .350 x.075 in. Concrete Installation Kit CMK1 (NOT INCLUDED) Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you. 5/16 x 2¾...
- Página 6 STEP 1 Attach Brackets to TV Standard configurations 1-1 Select TV Screw Diameter 1-2 Select TV Screw Length are shown. For special applications, or if you Hand thread screws into the threaded inserts If your TV has a flat back AND you want your TV closer to are uncertain about your on the back of your TV to determine which the wall, use the shorter screws (a).
- Página 7 1-3 Attach TV Brackets Ensure that your brackets are level on the back of the TV. Standard confi gurations are shown. For special applications, or if you are unsure about your hardware selection, contact Customer Service. Flat Back 03 04 05 06 07 IMPORTANT: After attaching the brackets, adjust the straps so...
- Página 8 STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) ●...
- Página 9 Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template IMPORTANT: Be sure to drill into the center of the studs. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Install wall plate assembly using four lag bolts and four washers...
- Página 10 STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! Concrete Installation Kit CMK1 is not included ● Mount the wall plate directly onto the concrete surface (see page 5) Contact Customer Service ●...
- Página 11 Remove the wall plate template and insert four anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit*). CAUTION: Be sure the anchors are seated flush with the concrete surface. using four lag bolts and four washers (use only the lag bolts and washers from the Concrete Installation Kit*). Install wall plate Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
- Página 12 STEP 3 Attach TV to Wall Plate HEAVY! You may need assistance with this step. IMPORTANT: You will hear an audible click when the TV bracket is securely fastened to the wall plate.
- Página 13 Adjustments ADJUSTING THE LEVEL: If needed, tighten one of the REMOVING THE TV: Pull down on the straps and lift the TV screws on the top of the TV bracket to level the TV. up and out away from the wall plate. LEVEL...
-
Página 14: Listo Para Comenzar
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este soporte sea el ideal para sus necesidades. ¿Su televisor pesa más de 59 kg (130 lb), incluidos los accesorios? No —... -
Página 15: Paso 1 Colocar La Placa De Sujeción En El Televisor
ESPAÑOL Dimensiones Ver página 3 Piezas y elementos de sujeción suministrados Ver página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;... - Página 16 ESPAÑOL PASO 2A Fijar la placa mural a la pared - Opción para montantes de madera Ver página 8 PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. ● El yeso que recubre la pared no debe exceder los 16 mm (5/8 pulgada). ●...
-
Página 17: Paso 3 Instalar El Televisor En La Pared
ESPAÑOL Realice los orificios guía con una mecha para mampostería de 10 mm (3/8’’) de diámetro. IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 75 mm (3’’). Nunca perfore el cemento que une los bloques. Retire la plantilla de la placa mural e introduzca cuatro anclajes (Fischer UX 10 x 60 - incluidos en el Kit de instalación en hormigón CMK1*). - Página 20 Thank you for choosing Sanus VuePoint! Please take a moment to let us know how we did: Call us: 1-888-333-9952 Email us: info@sanus.com Leave a review: vuepoint.sanus.com UK: 0800 056 2853 Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.