Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

F18b INSTRUCTION MANUAL
We'll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We're ready to help!
Scan for easy install video
san.us/255

Publicidad

loading

Resumen de contenidos para SANUS VuePoint F18b

  • Página 1 F18b INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/255...
  • Página 2 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! Does your TV weigh more than 35 lb (15.9 kg) including accessories? No — Perfect! 35 lb (15.9 kg) Yes —...
  • Página 3 Dimensions [20.0] 12° 12° [cm] [10.0] [7.5] [22.6] [20.0] [17.8] [10.0] [13.2] [5.3] [5.6] [3.3] [23.1]...
  • Página 4 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
  • Página 5 Concrete Installation Kit CMK2 (not included) STEP 2 Parts and Hardware Contact Customer Service at 1-888-333-9952 to have these Wall Plate Wall Plate Template additional pieces shipped directly to you. 1/4 x 2½ in. 1/4 in. Fischer UX 10 x 60 Anchor Lag Bolts 1/4 x 2½...
  • Página 6 STEP 1 Attach TV Bracket to TV 1-1 Measure Your TV Hole Pattern Measure the width and height of your TV hole pattern in cm. Record your measurements: Width __________cm x Height ________ cm 75 mm = 7.5 cm ≈ 3 in. 100 mm = 10 cm ≈...
  • Página 7 1-2 Assemble Your TV Bracket 20.0 x 20.0 Determine which TV bracket configuration to use, A or B based 20.0 on your TV hole pattern measurements. 20.0 7.5 x 7.5 10.0 10.0 x 10.0 20.0 20.0 X 10.0 10.0 NOTE: Nuts are poly-locks 3/8 in.
  • Página 8 1-3 Select TV Screw Diameter 1-4 Select TV Screw Length Standard configurations are shown. For special applications, or if you If your TV has a flat back AND you want your TV closer to the Hand thread screws into the threaded inserts are uncertain about your wall, use the shorter screws.
  • Página 9 1-5 Attach TV Bracket Position your TV bracket configuration over your TV hole pattern - making sure the brackets are vertically centered and level. Install using either the short screw and washer or spacer, long screw and washer combination you selected for your TV. IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
  • Página 10 STEP 2A Attach Wall Plate - Wood Stud CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) Locate your stud.
  • Página 11 Install wall plate using two lag bolts . Tighten the lag bolts only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate until level.
  • Página 12 STEP 2B Attach Wall Plate - Solid Concrete / Concrete Block CAUTION: Avoid potential personal injuries and property damage! Concrete Installation Kit CMK2 is not included ● Mount the wall plate directly onto the concrete surface (see page 5) Contact Customer Service ●...
  • Página 13 Remove the wall plate template and insert two anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit CMK2*). CAUTION: Be sure the anchors are seated flush with the concrete surface. Install wall plate using two lag bolts .
  • Página 14 STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. IMPORTANT: The locking tab needs to be in the unlocked position before attaching the TV to the wall plate. Once the TV is on the wall plate, the locking tab needs to be in the locked position.
  • Página 15 TV Adjustments ADJUSTING THE TILT: Loosen the knob on the TV bracket to adjust REMOVING THE TV: Place the locking tab into the unlocked the tilt of your TV. Tighten the knob when your TV is set to the position and lift the TV up and out away from the wall plate. desired tilt.
  • Página 16 INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. ESPAÑOL Antes de comenzar, verifiquemos que este soporte sea perfecto para usted. ¿Su televisor pesa más de 15.9 kg (35 libras), incluidos los accesorios? No — ¡Perfecto! 15.9 kg (35 lb) Sí...
  • Página 17 ESPAÑOL Piezas y accesorios suministrados ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
  • Página 18 ESPAÑOL 1-3 Seleccione el diámetro de los 1-4 Seleccione el largo de los tornillos tornillos para el televisor para el televisor Enrosque manualmente los tornillos en los Si el dorso del televisor es plano, utilice los PRECAUCIÓN: tornillos cortos. encastres roscados del dorso del televisor a Verifique que el tornillo o la combinación fin de determinar qué...
  • Página 19 ESPAÑOL Ajuste los tornillos tirafondo solamente hasta que queden firmes contra la placa mural PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo. NO ajuste en exceso los tornillos tirafondo. PASO 2B Fijar la placa mural - Hormigón sólido o bloques de cemento PRECAUCIÓN: Evite lesiones y daños materiales.
  • Página 20 ESPAÑOL PASO 3 Colgar el televisor en la placa mural ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. IMPORTANTE: La pestaña de bloqueo necesita estar liberada antes de fijar el televisor a la placa mural. Una vez que el televisor se encuentra en la placa mural, la pestaña de bloqueo debe estar en la posición de bloqueo. Resolución de problemas AJUSTE DE LA INCLINACIÓN: Afloje la perilla que se encuentra en la placa de sujeción del televisor a fin de ajustar la inclinación de su televisor.
  • Página 22 Thank you for choosing Sanus Vuepoint! Please take a moment to let us know how we did: Call us: 1-888-333-9952 Email us: info@sanus.com Leave a review: vuepoint.sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.