Manuales relacionados para SANUS VuePoint F80b
Resumen de contenidos para SANUS VuePoint F80b
- Página 1 F80b INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/252...
-
Página 2: Before You Begin
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before You Begin Please check the following items: Your TV and any accessories you plan to use do not exceed the specifi ed weight limit. The hole pattern on the back of your TV is compatible with the hole pattern of the TV brackets. -
Página 3: Weight Limit
Weight Limit Tools Needed 175 lb (79.4 kg) DO NOT EXCEED! (includes TV and any accessories) 5.5 mm 10 mm (7/32 in.) (3/8 in.) 13 mm (1/2 in.) - Página 4 Dimensions 31.26 [mm] 794.0 1.324 20.5 33.63 19.7 4.50 7.01 15.7 114.3 178.0 11.8 5° ADJUSTABLE TO 810mm...
- Página 5 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 6 Parts and Hardware for STEP 2 Parts and Hardware for STEP 1 Cont. Wall Plate Wall Plate Template Washers M6/M8 Spacers Washers Lag Bolts 5⁄16 2 3⁄ 4 5⁄16 Concrete Anchors...
- Página 7 Parts and Hardware for STEP 3 Tilt Brackets Screws Nuts 1/4-20 x 1/2 in.
- Página 8 STEP 1 Select TV Hardware and Attach Interface Brackets to TV Hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M5, M6, or M8). Determine what kind of TV you have and if you require extra space between the wall and the TV to accommodate cables. •...
- Página 9 STEP 1-A Ensure that your brackets are level on the back of the TV. If you need extra space to accommodate cables, recesses, or protrusions; use spacers (see the irregular back option on the next page). 09 10 03 04 05 IMPORTANT: After attaching the brackets, adjust the straps so they are level with...
- Página 10 STEP 1-B Ensure that your brackets are level on the back of the TV. Standard confi gurations are shown. For special applications, or if you are unsure about your hardware selection, contact Customer Service. 09 10 06 07 08 IMPORTANT: After attaching the brackets, adjust the straps so they are level with the bottom of the TV.
- Página 12 STEP 2 Attach Wall Plate to Wall - Wood Stud Option Locate your stud(s). Verify the center of the stud using an awl, a thin nail, or an edge to edge stud finder. CAUTION: Avoid potential personal injuries and property damage! ●...
- Página 13 STEP 2 Drill pilot holes. IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit. Tighten the lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt.
- Página 14 STEP 2 Attach Wall Plate to Wall - Solid Concrete or Concrete Block Option Level the wall plate template and mark the hole locations. CAUTION: Avoid potential personal injuries and property damage! ● Mount the wall plate directly onto the concrete surface ●...
- Página 15 STEP 2 Insert anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Tighten the lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
- Página 16 STEP 3 Attach TV to Wall 01 02 NOTE: If you want 5° of downward tilt, attach the tilt brackets to the TV brackets 0° 5°...
- Página 17 STEP 3 5° tilt 5° tilt HEAVY! You may need assistance with this step. IMPORTANT: You will hear an audible click when the TV bracket is securely fastened to the wall plate.
- Página 18 Troubleshooting REMOVING THE TV: Pull down on the straps and lift the TV up and out away from the wall plate.
-
Página 20: Antes De Comenzar
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar Cerciórese de: que su televisor y los accesorios que planifi ca usar no excedan el límite de peso especifi cado; que el patrón de orifi cios de la parte trasera de su televisor sea compatible con el patrón de orifi cios de las placas de sujeción para el televisor;... -
Página 21: Piezas Y Elementos De Sujeción Suministrados
ESPAÑOL Piezas y elementos de sujeción suministrados ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;... - Página 22 ESPAÑOL PASO 1-B 01 02 Asegúrese de que las placas de sujeción queden niveladas en la parte posterior del televisor. Se ilustran las confi guraciones estándar. Si desea información sobre aplicaciones especiales o si tiene dudas sobre la selección de piezas, contáctese con el servicio de atención al cliente. IMPORTANTE: Luego de fi...
-
Página 23: Instalar El Televisor En La Pared
ESPAÑOL Fijar la placa mural a la pared - Opción para hormigón sólido o bloques de cemento Nivele la placa mural y marque la ubicación de los orifi cios. PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. ● Instale la placa mural directamente sobre la superficie de hormigón. - Página 24 Thank you for choosing Sanus VuePoint! Please take a moment to let us know how we did: Call us: 888-333-9952 Email us: info@sanus.com Leave a review: vuepoint.sanus.com UK: 0800 056 2853 Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.