Orbegozo TO 3050 Manual De Instrucciones página 13

TO 3050
TOASTER FEATURES
1. Pull out crumb tray: Removes easily to clean crumbs from bottom of toaster.
2. Reheat function: Reheats without browning. Indicator lights when selected.
3. Rotary electronic browning control: Sets desired toast color from light to dark.
4. Cancel function: Interrupts toasting process when pressed.
5. Defrost function: Defrosts and toasts frozen bread. Indicator lights when selected.
6. Bread carriage lever: To pull down the bread
7. Bread slots: To insert the bread.
USE & CARE
Before first use, remove all packaging from toaster. Check inside toaster slots for packaging and
remove.
Note: Do not place any bread in toaster during the first toasting to allow the new elements to preheat
and burn off any dust that may have accumulated during assembly.
1. Make sure the crumb tray is in place and the bread carriage lever is on the UP position.
2. Set up toaster on flat, stable countertop surface away from the edge and at least 3 inches
away from wall or rear of counter.
3. Unwind power cord and plug power cord into nearby outlet.
4. Insert slices of bread. Be sure the bread carriage lever is on UP position.
5. Turn the light/dark selector onto desired position. The higher the number (1-7), the darker
the toast color.
6. Press the bread carriage lever down until it locks into position.
7. When the toasting cycle is completed the toast is automatically ejected up. To terminate the
toasting cycle before it is completed, simply press the cancel button.
8. After use, unplug the toaster from electrical outlet.
TOASTING NOTES
Toasting is a combination of cooking and drying the bread; moisture levels differ from one bread to
another, which can result in varying toasting times.
1. Pull out crumb tray
2. Reheat function setting
3. Electronic browning control
4. Cancel function setting
5. Defrost function setting
6. Bread carriage lever
7. Bread slots
13