Troubleshooting; Care And Maintenance - Toolland DTB10003 Manual Del Usuario

5. Turn the spray nozzle to adjust the spray width.
a
b
8.

Troubleshooting

The appliance does not
start after being switched
The appliance does not
spray when the trigger is
9.

Care and Maintenance

Cleaning
•
Do not clean the appliance in the presence of naked flames.
•
Before doing any cleaning, remove any spraying agent from the tank, depressurize,
switch off the appliance and remove the battery.
•
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a
soap and water solution. Do not immerse or submerge any part of the appliance in
water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
Maintenance
•
This appliance cannot be repaired and should be scrapped according to the local
environmental rules when damaged.
Storage
•
Remove the battery from the appliance before storing. Keep the battery in a clean
and dry area.
•
Remove any spraying agent from the tank before storing.
•
Store the appliance and its accessories in a clean and dry area.
•
Ensure that the appliance is stored in a safe place where unauthorised persons
cannot access it.
V. 01 – 25/03/2020
direct spray
wide spray
Problem
on.
pressed.
DTB10003
c
Possible cause
The battery is out of
power.
The power switch is
damaged.
The filter is clogged.
8
lance
Possible solution
Fully charge the battery.
The appliance is damaged.
Please dispose of within
the local rules.
Take out the filter and
clean it.
©Velleman nv