Removing Clogs - Panasonic Quickdraw MC-V5737 Instrucciones De Operación

Hose
Tuyau
Manguera
Tabs
Languettes
Lengüetas
+

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Suction
Inlet
Couvercle
(entrée
d'aspiration)
Abertura de
aspiración
Motor
Protector
Protecteur
du moteur
Protector
de motor
Short Hose
Tuyau court
Manguera
corta
Short Hose
Tuyau court
Manguera
corta
- 36 -
Unplug vacuum.
Press two tabs and pull open suction
inlet and check for clogging.
Disconnect hose from short hose and
check the hose for clogging.
Plug in vacuum cleaner and turn on.
Stretch hose in and out to remove
clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Remove short hose from nozzle by
lifting straight up.
Inspect hose end and clear any
obstructions.
Reinstall short hose.
Reinstall lower plate.