GE Profile JVM1790 Serie Manual Del Propietário página 31

Problem
Food browns on top much
faster than on the bottom
Oven temperature
fluctuates during cooking
Vent fan comes on
automatically
SENSOR ERROR appears
on the display
Possible Causes
Rack has been placed in the
"high" position.
The cooking element cycles
on and off to maintain the
oven temperature at the
desired setting.
The vent fan automatically turns
on to protect the microwave if it
senses too much heat rising from
the cooktop below.
During Bake, Roast or Fast Bake
(after preheating), the vent fan
will automatically come on to
cool the oven components.
When using a Sensor feature,
the door was opened before
steam could be detected.
Steam was not detected in a
maximum amount of time.
What To Do
• Always use the rack in its "low" position.
• This is normal.
•This is normal.
•This is normal.
•Do not open door until steam is sensed and time
is shown counting down on the display.
•Use Time Cook to heat for more time.
ge.com
31