Using The Screen On-Screen Display - Sony Trinitron CPD-100GS Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Customizing Your Monitor
3
Press the ¨./> buttons to select the color
temperature.
There are two color temperature modes in the OSD.
The preset adjustments are 9,300K and 5,000K.
Selecting your own color temperature between
9,300K and 5,000K
Press the ¨./> buttons to select "
and adjust by pressing the >?// buttons.
/ . . . for a higher temperature (bluish)
? . . . for a lower temperature (reddish)
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on. The
selected color temperature is reset to the factory settings.
12
Using the SCREEN On-screen
Display
Adjust convergence settings to eliminate red or blue
shadows that may appear around objects on the screen.
Adjust the CANCEL MOIRE function to eliminate wavy or
elliptical lines that may appear on the screen.
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1
(VARIABLE)"
COLOR
9300K
5000K
50
2
VARIABLE
3
Select
H CONVERGENCE
V CONVERGENCE
CANCEL MOIRE
MOIRE ADJUST
* CANCEL MOIRE must be "ON" for "
Press the MENU button.
The MENU OSD appears.
MENU
Press the ¨./> and >?// buttons to select "
SCREEN," and press the MENU button again.
The SCREEN OSD appears.
Press the ¨./> buttons to select the item you want
to adjust.
To
adjust the horizontal convergence
adjust the vertical convergence
eliminate elliptical or wavy lines on
the screen
*
adjust the degree of moire
cancellation
to appear on the screen.
SCREEN
26
H CONVERGENCE
(MOIRE ADJUST)"

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Trinitron cpd-200gs

Tabla de contenido