Troubleshooting - Milwaukee Pro-Vac 8934 Manual Del Operador

Trouble shooting
If you have any problems with your Pro-Vac use the trouble shooting
guide below.
Problem Possible Cause
vacuum will not start no electric power
defective switch
defective motor
dust blowing out filters not functional
exhaust vents
loss of vacuum
loose hose connection
filter clogged
full bag
hole in the hose
Page 6
Storage (Figs. 5 & 6)
1.
2.
Solution
3.
• check wall outlet
with another appli-
Fig. 5
ance (such as a
lamp) or try
another wall outlet.
• check wall switch
• check home fuse
or circuit breaker
• replace switch
• replace motor
• replace full bag
• make sure bag is
fully attached
• make sure that
bag isn't ripped
• clean secondary
filter
• replace second-
ary filter
• tighten hose
connections
• clean secondary
filter
• replace second-
ary filter
• replace full bag
• replace hose
Mount the wall bracket to the wall.
Wrap the cord around the bottom of the vacuum and around the handle
and clip the plug to the cord.
Hang the vacuum from the wall bracket by the hook on the back of the
vacuum.
Fig. 6