Clearing Errors And Overflows; Performing Basic Calculations - Texas Instruments TI-5660 Manual De Instrucciones

Clearing Errors and Overflows

Correcting Entry Errors
If you have not pressed an operation key:
• To clear an incorrect entry, press I. You can then enter the
correct value and continue with your calculation.
• To clear the last digit, press (.
If you have pressed an operation key:
• To cancel an incorrect entry, press the opposite operation key. This
applies only to calculations involving 9, ., N,or F.
Error and Overflow Conditions and Indicators
If you divide by zero or calculate a selling price using a margin of 100%, an
error occurs. The calculator prints ERROR
An overflow occurs if you calculate a result with too many digits for the
calculator to display or print. When this occurs, the calculator:
• Displays E and the first 12 digits of the result with a decimal point 11
places to the left of its correct position.
• Prints ERROR and the first 12 digits of the result with the decimal
shifted 11 places to the left of its correct position.
To clear an error or overflow,
unless the error or overflow occurred in a memory calculation.

Performing Basic Calculations

Addition and Subtraction
DECIMAL = +, ROUND = 5/4, TAX = CALC, PRINTER = IC
Press
2 1241 9
395 .
:
540 9
E
0 .*
press 2. The memory is not cleared
12.41 – 3.95 + 5.40 = 13.86
Display
12.41
8.46
8.46
13.86
13.86
4
and displays E and
Print
12.41
3.95
002
8.46
5.40
003
13.86
.
0
+
–
U
+
∗