rcf L-PAD 16CXusb Manual Del Usuario página 10

FUNCTIONS
00-09 ECHO
10-19 ECHO+VERB
20-29 TREMOLO
30-39 PLATE
40-49 CHORUS
50-59 VOCAL
60-69 ROTARY
70-79 SMALL ROOM
80-89 FLANGE+VERB
90-99 LARGE HALL
[19] MANAGEMENT OF THE INTERNAL EFFECT SEND TOWARDS AUXILIARIES AND TOWARDS THE DEDICATED FX OUT
TO AUX 1: sends the output of the internal effect towards AUX 1. Ideal for sending the internal effect to a stage
monitor connected to AUX 1.
TO AUX 2: sends the output of the internal effect towards AUX 2. Ideal for sending the internal effect to a stage
monitor connected to AUX 2.
TO FX OUT: sends the output of the internal effect towards the dedicated FX ST. OUT output situated on the
rear panel.
[20] AUDIO OUTPUTS FOR TRS 1/4" JACK CONNECTORS.
NOTE: see also the manual section entitled „Wiring the connectors".
PHONES: two stereo outputs (A and B) for the connection of headphones.
CONTROL ROOM: balanced L (Left channel) and R (Right channel) outputs which can be
used, for instance, for connecting to amplified control room speakers (or other monitors).
AUX SEND: balanced 1, 2, 3, 4 (FX) outputs of the corresponding AUX auxiliary sends.
GROUP OUT: balanced 1, 2, 3, 4 outputs of the corresponding GROUP groups.
[21] UNBALANCED STEREO AUDIO 2TK IN INPUT AND 2TK OUT OUTPUT (RCA CONNECTORS).
2TK IN: stereo audio input (L: left channel, R: right channel) for connecting the output of an external music source
(e.g. CD or MP3 player) or a recorder.
2TK OUT: stereo audio output (L: left channel, R: right channel) for connecting to the input of the recorder (or other audio device).
[22] LAMP SOCKET. USES A USB SOCKET TO POWER A LAMP WITH A 5V-500MA VOLTAGE
10
The echo is added to the sound ("delay" effect).
Applicable to both voice and musical instruments.
Echo plus reverb, similar to the previous ECHO, but more intense.
Amplitude modulation of the sound (cyclic variation of the volume); ideal effect for electric guitar
and organ.
Plate reverb, recommended for snare drums or percussion.
Ideal reverb for adding depth and intens The "Chorus" effect adds a second signal (a copy) which is
slightly discordant with the input, thus creating a kind of "chorus".
Effect recommended on guitar, keyboards and fretless bass. ity to the lead vocals or instrumental
solos.
Ideal reverb for adding depth and intensity to the lead vocals or instrumental solos.
Simulation of a rotating speaker system, perfect effect for the organ and also suitable for electric
pianos.
Effect that reproduces the reverberation in a small room and is excellent for all instruments
(including percussion).
The "Flanger" is an effect which is very similar to the "Chorus", but with a stronger signal (with
extreme settings, you can hear a kind of characteristic whistle); reverb is also added to this.
Recommended for particular guitar and/or drums sounds.
This effect recreates the reverberation in a large hall; it is ideal for vocals and can also be used with
instruments.