Terk TRINITY XTEND Instrucciones página 5

HD ANTENNA SETUP
5
Plug in the antenna's power cord to a power outlet.
for
Amplifier
6
Scan for channels on your TV.
Most TVs have a channel scan option in their menu system, many times in a SETUP or
CHANNEL menu under ANTENNA. For detailed instructions on performing a channel
scan, see the owner's manual that came with your TV.
IMPORTANT: For some channels you might get better performance with the Trinity Xtend antenna in
a different position or facing a different direction. Sometimes just a little bit of adjustment can make a
difference!
(continued)
The Trinity Xtend's POWER light
illuminates to show that the Xtend is on.
TIP: The AMP / BYPASS switch lets you turn the amplifier for TV signals
on (AMP) or off (BYPASS). Most TV channels will perform better
with this switch left in the AMP position. However, if a channel is not
providing the performance you expect, try watching it with this switch
in the BYPASS position to see if that makes a difference.
5