Kenwood KDC-MP4028 Manual De Instrucciones página 26

Basic Operations of remote
Audio Control
[AUD] button
Select the Audio item for adjustment.
[VOL] buttons
Adjust the Audio item.
• Refer to <Audio Control> (page 9) for the operation
method, such as the procedures of Audio control and
others.
In Tuner source
[FM]/ [AM] buttons
Select the band.
Each time the [FM] button is pressed, it switches
between the FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT]/ [OK] button (KDC-MP4028/
KDC-MP428)
Enters and cancels the <Direct Access Tuning>
(page 14) mode.
In Disc source
[4]/ [¢] buttons
Doing track/file forward and backward.
+ –
[ ]/ [ ] buttons
Doing disc/folder forward and backward.
[38] button
Each time the button is pressed, the song pauses
and plays.
[0] — [9] buttons
When in <Direct Track/File Search> (page 16) and
<Direct Disc Search> (page 17), enter the track/
file/disc number.
26
|
English
In SIRIUS tuner source
[FM] button
Select the preset band.
[4]/ [¢] buttons
Search up or down channel.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset channels.
[DIRECT]/ [OK] button
Enters and cancels the <Direct Access Tuning>
mode.
• Refer to the instruction manual of SIRIUS Satellite radio
tuner for <Direct Access Tuning> function.
In HD Radio source
[FM] button
Select the HF band.
Each time the [FM] button is pressed, it switches
between the HF1, HF2, and HF3 bands.
[AM] button
Select the HA band.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.