Chauvet Professional COLORdash Par-Quad 18 Guía De Referencia Rápida página 3

COLORdash™ Par-Quad 18 QRG
AC Plug
Fuse
Replacement
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The COLORdash™ Par-Quad 18 will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
The COLORdash™ Par-Quad 18 uses a regular DMX data connection for
its DMX personalities: 4 Ch, 6 Ch, and 10 Ch. See the User Manual to
connect and configure for DMX operation.
The COLORdash™ Par-Quad 18 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Before mounting this product, read the
mounting clamp is capable of supporting the weight of the product. For our
Chauvet line of mounting clamps, go to
plates-accessories-clamps/.
Overhead Mounting
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Screw Color
Brown Yellow/Brass
Blue
Safety Notes. Make sure the
trusst.com/productcategory/base-
Secure the safety cable using
the passageway on the back
of the product.
Floor Mounting
Function
EN
Silver
Green