Locking The Brake; Securing The Cover And Flag; Installing Additional Lights; Adjusting The Handlebar - Burley Cub X Manual De Instrucciones Y Seguridad Del Propietario

Locking the Brake

1. To lock the brake, slide the lever to the right
(Figure 18). To release the brake, slide the lever
to the left.
Figure 18

Securing the Cover and Flag

1. Insert hook into loop and pull up on webbing to tighten
the fit (Figure 21).
2. Depress the yellow button and slide the flag pole into
hole on flag holder. To release, push button and lift flag
pole out (Figure 22).

Installing Additional Lights

Fabric loops are located on the back of the bag and should be
used to attach additional lights and/or reflectors (See page 4).
8
ENG

Adjusting the Handlebar

1. Tow mode: Always rotate the handlebar forward when trailer is in towing mode (Figure 19A). The handlebar should be
horizontal and parallel to the ground, such that the mark on the handlebar is aligned with the bolt that attaches the cover
(Figure 20).
2. Stroll / Jog mode: The handlebar may be rotated to serve as a handlebar while trailer is in strolling or jogging mode (Figure
19B). Open lever to rotate (Figure 20) and close lever to lock in place.
Note: Always use the jogging tether when used as a stroller.
B
A
Figure 21
Figure 19
CHILD TRAILER
Figure 20
Figure 22