Programming Random Switching - Grasslin talento smart B15 Instrucciones De Manejo

PROGRAMMING RANDOM SWITCHING

Random switching is only possible for certain variants.
Menu
OK
Program
OK
New
With Date?
Yes/No
Select FNC
Random ON/OFF
Fig. 35: Programming random switching
Random programming is only possible in advanced mode (Ä Chapter „Selecting the mode" on
page 82).
Example
Channel 1 is switched on at random at 6:30 a.m. with an offset of ± 30 minutes, Monday to Friday.
1. Press the
Menu
2. Select
Program
3. Select and confirm with
New
The number of available programme memory slots is displayed briefly (PXXX).
ð
The number of available switching programme memory slots is displayed briefly (dXXX).
4. In menu item
With Date?
date (Ä Chapter „Date-dependent/date-independent programming" on page 93).
5. Select the
Random ON
You can define an offset of up to ± 2 hours.
OK
Time
06:00
Hours
Time
06:30
Minutes
OK
Offset
00:00
Hours
OK
button.
and confirm with .
OK
.
OK
, specify whether the switching programme is to be programmed with a
or
Random OFF
Days
12345--
Mon – Fri
OK
Channels
––
CH1
OK
OK
Offset
00:30
Minutes
function and confirm with
OK
OK
OK
Add
switching time?
Yes/No
OK
Priority
Very low...
.
OK
EN
105