ingenuity Dreamcomfort Smartbounce Automatic Bouncer Townsend Manual Del Usuario página 25

ENGLISH
Using the Bounce/Music Unit
Power Button – Press the Power Button to turn ON the Bounce/music Unit.
The amber power LED illuminates and the bounce/music functions are
available. After 30 minutes, the Bounce/music Unit will stop automatically
(time out). If you turn OFF the unit using the Power Button, the bouncer and
music/sound functions are no longer active.
To use the Bounce Function: Press the Bounce Button. The left, green LED
will illuminate, indicating the bounce function is on low speed mode. If you
press the Bounce Button twice the left and right green LEDs will illuminate,
indicating the bounce function is on high speed mode. The bounce function
operates at two speeds and automatically turns OFF after 30 minutes of
continuous operation. Pressing the Bounce Button three times causes the
Bounce function to go into standby mode.
To use the Music/Sounds Function: Press the Music/Sound Button to
alternate between Music and Nature Sounds. When the music/sounds
function is activated, the volume level will be the one previously seleced.
The Music setting will play the song list of melodies for approximately 30
minutes. Any selected nature sound will play for approximately 30 minutes.
Auto-shutoff occurs after the last melody or when nature sound play ends.
Press the Music/sound Button to activate music or nature sounds again.
Volume Control Button – Press the Volume Control Button to alternate
between Low, Medium, High, and Mute settings.
- 25 -