Feed Timer; Setting The Feed Timer Repeat - Philips AVENT SCD710 Manual Del Usuario

English
14
Lullaby

Feed timer

3 When the nightlight is on and you want to switch it off, select 'Nightlight'
in the menu and press OK to choose 'Turn Off'. The nightlight symbol
disappears from the display.
1 To play one or more lullabies on the baby unit, select 'Lullaby' in the
menu with the + and - buttons. Press OK to confirm.
2 Press OK again to play the first lullaby. Use the + and - buttons to select
one of the lullabies or 'Play all'.
The display shows the lullaby symbol and the number of the lullaby that
is playing. The selected lullaby repeats continuously for 15 minutes,
unless you select 'stop' in the menu.
If you select 'Play all', all pre-stored lullabies are played for 15 minutes.
The display shows the number of the lullaby that is playing.
3 To stop playing, select 'Stop' in the menu and press OK to confirm.
You can set the feed timer to alert you that it is time to feed your baby. The
timer can be set from 1 minute to 23 hours and 59 minutes.
1 To open the feed timer submenu, select 'Feed Timer' in the menu. Press
OK to confirm.
2 Select 'Set Timer' in the feed timer submenu. Press OK to start setting the
timer.
3 Set the hour and the minutes and press OK to confirm.
4 To start the feed timer, select 'xx:xx Start' in the feed timer submenu.
Press OK to confirm. The timer symbol appears on the display and the
timer starts counting down.
5 When the timer has reached 00:00, the feed timer alert goes off, the
timer symbol starts flashing on the display and the message 'TIMER END'
scrolls across the display.
6 To stop the timer, select 'Stop & Reset' in the feed timer submenu and
press OK to confirm.

Setting the feed timer repeat

1 To make the feed timer go off after the same set time, select 'Timer
repeat' in the feed timer submenu after you have set the timer. Press OK
to confirm.
2 Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer
repeat symbol appears on the display.
3 If 'Repeat ON' is set, the feed timer starts counting down again after you
stop the alert.