Assembly - Hanging the Fan (continued)
3
Making the electrical connection
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
IMPORTANT: If after this step, you decide to check that the
electrical connections have been successful, it is critical to attach
the light kit using the quick connector prior to testing. The fan will
not operate unless the light kit is connected to the fan.
NOTE: The fan comes with 54 in. lead wires for use with an
extended ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.).
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
□
Connect the fan motor black wire to the household black wire
using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nuts (BB) upward and push the
wiring into the outlet box (OO).
Black
Black
9
Please contact 1-800-986-3460 for further assistance.
Outlet box
in the ceiling
(OO)
Green or Bare
White
Green
Required
connection
for fan
operation
HOMEDEPOT.COM/HOMEDECORATORS