First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with
Iukewarm water and some neutral soap so as to remove the typical smell of a brand new product,
and then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Buttons
B1— Press to adjust setting of fridge compartment in cycle of 1, 2,3,4 to 5.
B2— Press to select mode from Smart, Super and user's setting.
Lights
L1 — show the setting of fridge compartment.
L2 — light on once Smart mode is selected.
L3 — light on once Super mode is selected.
Operation
Temperature Setting
Press Mode button (B2) to select user's setting.
1.
Press Adjust button (B1) to adjust the setting of fridge. Higher setting means lower
2.
temperature. The temperature of freezer is automatically controlled at around -18°C.
Smart Mode
Press Mode button (B2) to select Smart mode.
The appliance will run automatically according to ambient temperature around the appliance.
Super Mode
Press Mode button (B2) to select Super mode.
The appliance will run to make freezer compartment coldest. After 54 hours, the original
temperature set will be automatically restored.
Turn off the appliance
Press and hold Adjust button (B1) for 5 seconds, the appliance will turn off.
Press 5 seconds again to turn on the appliance.
Door open alarm
The alarm will sound when door is left open for 90 seconds and it will not stop until the door
is closed.
16