Skil HD529401 Manual Del Propietário página 12

To Attach/Detach Battery Pack
Lock the variable-speed trigger switch "OFF"
by placing the direction-of-rotation (forward/
center-lock/reverse) selector in the center
position before attaching or detaching the
battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves on the tool, and then slide the battery
pack onto the tool (Fig. 3).
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack to release the
battery pack. Pull the battery pack out and
remove it from the tool (Fig. 3).
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery
pack aligns with the groove inside the tool and that the latches snap into place properly.
Improper attachment of the battery pack can cause damage to internal components.
WARNING
always be locked in the center position when the tool is not in use or when carrying it
at your side .
12
Battery tools are always in operating condition . Therefore, the
direction-of-rotation (forward/center-lock/reverse) selector should
Fig. 3
Attach
Battery- Release Button Detach