Setting And Storing Personal Data In Memory - Tanita BC-601FS Manual De Instrucciones

SETTING AND STORING PERSONAL DATA IN MEMORY

You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
The monitor can store personal details for up to 4 people.
Press SET to turn on the unit. Use the
Note:
• If you don't operate the unit for 60 seconds after the unit has been turned on, the unit will turn off automatically.
• If you make a mistake or want to turn the unit off before you have finished programming it, press the
force quit.
1. Select a personal key number (Up to 4 users)
2. Set your Birthday (Year/Month/Day).
3. Select Female or Male
Female ( ), Male ( ), Female/Athlete (
4. Specify the Height
5. Specify the Activity Level
To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.
Use the button to specify Activity Level. Press the SET to confirm.
Level 1 = Inactive lifestyles (little or no exercise)
Level 2 = Moderately active lifestyles (occasional, low intensity exercise)
Level 3 = Adult involved in intense physical activity (see p.1. for Tanita's definition of Athlete)
Note: If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.
The unit will beep twice and your programmed data will be displayed to confirm.
The power will then shut down automatically.
Note:
• When you change the birthday and/or gender, the unit will show "CLr". If you select "YES" using
existing personal data and tracking data will be deleted. If you select "no" using
(existing data will be unchanged) then the unit will be shut off.
• In order to delete personal data, press SET and choose a number with
will show CLr. Choose YES or no with
/ buttons to scroll through numbers. Press SET to confirm.
), and Male/Athlete ( )
/ and press SET to confirm.
5
Setting complete.
/
/ , no new data will be saved
/ , then press and hold SET. The display
EN
to
/OFF
buttons , the