Switching.the.weight.mode; Setting And Storing Personal Data In Memory - Tanita IRONMAN BC-549 plus Manual De Instrucciones

SWITCHING THE WEIGHT MODE
You can switch the unit indication by using the switch on the back of the scale as shown in the figure.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches.
Similarly, if kilograms is selected, height will be automatically set to centimetres.

SETTING AND STORING PERSONAL DATA IN MEMORY

You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
The monitor can store personal details for up to 4 people.
1. Turn on the Power
Press the Set button to turn on the unit (once programmed, tapping a Personal Key
turns on the unit.) The unit will beep to confirm activation, the Personal Key numbers
(1,2,3,4) will be displayed, and the display will flash.
Note: If you don't operate the unit for sixty seconds after the unit has been turned on,
the unit will turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have
finished programming it, press the Weight-Only Key (
quit.
2. Select a Personal Key Number
Press the Up/Down buttons to select a Personal Key. Once you reach the Personal Key
number you wish to use, press the Set button. The unit will beep once to confirm.
3. Set Age
The display defaults to Age 30 (range of user age is between 7-99). An arrow icon
appears on the lower left side to indicate Age setting. Use the Up/Down buttons to
scroll through numbers. When you reach your age, press the Set button. The unit will
beep once to confirm.
4. Select Female or Male
Use the Up/Down buttons to scroll through Female (
( / ) and Male/Athlete (
beep once to confirm.
5. Specify the Height
The display defaults to 5' 7.0" (170cm) (range of user is from 3' 4.0"–7' 3.0" or 100cm
– 220cm). Use the Up/Down buttons to specify Height and then press the Set button.
The unit will beep twice and the display will flash all data (Male/Female, Age,
Height, etc.) three times to confirm the programming. The power will then shut down
automatically.
) or Male (
/ ) settings, then press the Set button. The unit will
Note: For use only with models containing the weight mode switch
) to force
), Female/Athlete